The PowerBlock 120W Inverter can accept voltage between 10V-16.5V DC.
Most camcorder batteries supply 10V-16.3V, but some high-capacity batteries and block batteries supply voltage as high as 16.8V. Please check the operator's manual supplied with your power source before connecting it to the PowerBlock to confirm it operates within the Inverter's 10V-16.5V operating range.
Please note that our XLR inputs are wired for broadcast standard, which is used by Anton/Bauer and compatible block batteries (Pin-1 GND, Pin-4 +VDC). Do not use Panavision block battery cables with the PowerBlock Inverter as they are wired differently. If you are powering the PowerBlock Inverter from a Panavision Block Battery, please make sure your 4-pin XLR cable is wired correctly.
Related Article: What do the LED colors on the PowerBlock 120W Inverter indicate?